Industrial scrubbers are mainly divided into walk-behind scrubbers and ride-on scrubbers. Whether it is a walk-behind scrubber or a ride-on scrubber, they can quickly and effectively complete the cleaning work.
Compared with this kind of large-scale cleaning equipment, it is necessary to understand the structure and working principle of the scrubber, and know the working process of the scrubber, because incorrect use will cause failures to the scrubber and cause damage to the scrubber damage.
Next, I will tell you that it only takes 8 steps to master the tips of using the walk-behind floor scrubber, and you don’t have to worry about dirty cleaning, inability to use, or frequent failures of the floor scrubber.
The process of using the walk-behind scrubber as follows:
- 1.Open the clean water tank, inject clean water and appropriate amount of industrial detergent and defoamer. Note: It is strictly forbidden to pour washing powder, high-foaming detergent, and detergent into the water tank, the resulting foam will damage or burn the machine !
- 2.Put down the squeegee and the brush plate on the ground.
- 3.Turn on the water valve switch to adjust the water output.
- 4.Turn on the power switch, brush plate switch, and water suction switch in turn, start working,then cleaning the floor.
- 5.After cleaning, turn off the brush plate switch, water valve switch, water suction switch and power switch in turn.
- 6.Lift the squeegee and brush plate off the ground.
- 7.Open the sewage tank, discharge the sewage and clean the sewage tank.
- 8.Charge the machine and place the machine in a well-ventilated place.
The above is the use process of the walk-behind scrubber.
To be proficient in using the washing machine, you need to learn different tutorials according to different types of scrubber. The newly purchased scrubber needs to carefully study and watch the manufacturer’s instructions to avoid failure.